Single reduction worm gearing offers high ratio reduction with few moving parts in a close-coupled small drive. The right angle set up of driving-to-driven machine takes a minimum of space. Input and result shafts can be extended in either or both directions in horizontal or vertical arrangements adaptable to any installation requirement. Efficient engine speeds are decreased to slow speed requirements of many industrial machines in a single reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Encounter Adapters or Scoops)
Cast Iron or Steel Housings
Products
The exclusive utilization of the involute Helicoid Thread form (with departing side contact) on the worm and gear offers high efficiencies, and lengthy service life. The hardened floor and polished alloy steel worm develops a clean, work hardened surface area on the bronze equipment. For this reason worm gears wear in and improve with extented service while other gears are wearing out. Ever-Power offers a wide selection of model configurations, sizes, ratios, and add-ons from our standard product line.
Fabricated Designs
If the application involves severe shock loads or feasible housing damage from external sources (as in steel mills or mobile devices applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide optimum rigidity and strength which allows the tranny of higher horsepower amounts than are feasible with standard cast iron devices. Extra heavy side plates connect the worm and gear shaft bearing facilitates, assuring correct meshing of the worm gear speed reducer apparatus under all load conditions. In smaller sized sizes, fabricated steel reducers are interchangeable with Ever-Power regular cast iron reducers.
Custom Designs
Ever-Power can provide custom swiftness and reversed engineered reducers for your application, be it a new project or a direct drop-in alternative to a competitor’s rate reducer. Fabricated metal reducers enable Ever-Power to complement a competitor’s footprint, centerline, and shaft elevation allowing a primary drop-in replacement saving the customer time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are produced from phosphorous bronze. Our style also includes a hardened, surface and polished alloy steel worm. This combination develops a even, work-hardened mating surface area of the bronze equipment which boosts with prolonged service.
Worm gearing is a class of gear reducers that utilizes right angle, nonintersecting shafts. This form of reducer provides soft and quiet procedure and allows for the probability of large velocity reductions. These gears are available from share in a wide selection of ratios, from as low as 4:1 to as much as 3600:1. The small design and building allows worm equipment reducers to be placed in a comparatively small space. Thus, very high reductions in a limited package size may be accomplished with this configuration. Our worm equipment features the continuous sliding tooth actions between worm and one’s teeth. This increases the tolerance for large loads and shock loads. Worm gear drives provide users high reducing convenience of relatively low cost in comparison with some other types of gearing.
The utilization of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that make use of worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm gear reducer gearbox series base on years of encounters uses designed teeth surface with unsurpassed torque transfer functionality with great performance, efficency and price.Worm gear program transmits power through sliding get in touch with, leading to extremely low vibration , noise, small backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for severe impacts. Outer cooling fins and inner lubrication oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Steel S45C or SCM415, precison machined and carburized to HRC45 or HRC60, after that for precision tooth grinding to make sure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one type of reduction gear box which contains a worm pinion input, an output worm equipment, and features a right angle result orientation. This kind of reduction gear package is normally used to take a rated motor quickness and create a low speed result with higher torque worth based on the decrease ratio. They often times can solve space-saving problems since the worm gear reducer is among the sleekest reduction gearboxes available because of the little diameter of its result gear.
worm gear reducerWorm equipment reducers are also a popular type of swiftness reducer because they offer the greatest speed reduction in the tiniest package. With a higher ratio of speed reduction and high torque result multiplier, it’s unsurprising that lots of power transmission systems make use of a worm gear reducer. Some of the most typical applications for worm gears are available in tuning instruments, medical assessment equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission provides two sizes of worm gear reducer, the SW-1 and the SW-5 and both can be found in a variety of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both these options are produced with durable compression-molded glass-fill up polyester housings for a durable, long lasting, light-weight speed reducer that’s also compact, noncorrosive, and nonmetallic.
Features
Our worm gear reducers offer an option of a solid or hollow result shaft and feature an adjustable mounting position. Both the SW-1 and the SW-5, nevertheless, can endure shock loading much better than other reduction gearbox designs, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Reducers also called worm gearbox or worm quickness reducers. Worm gear reducers are utilized for speed decrease and increasing the torque for electric powered motor drives. You can choose to mount your NEMA motor to the reducer utilizing the NEMA C encounter flange or make use of a coupling. If you want a coupling for the result or input shaft find our coupling section for selecting a coupling. We offer four assemblies left hand and right hand and double result shaft and shaft insight and shaft result. Interchangeable with the majority of worm gear manufactures. See data sheet in product overview for diamensions. If you don’t see your type, make sure you Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear quickness reducers can be found in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes on request). Result torque ranges from 33,000 in lbs. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are perfect for water/waste-water apparatus drive applications such as thickeners and clarifiers, which require a vertical down shaft. Other obtainable configurations also make Ever-Power triple decrease reducers perfect for use on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or additional process or materials handling systems where huge torques/slow speeds are needed.
These reducers are also available with a helical major reduction stage and are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM only 0.01 with a 1750 RPM input.
Ideal for ultra-slow speed, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are found in low to moderate horsepower applications to lessen speeds and increase torque. Worm gear reducers are available in direct or indirect drive, direct drive models are 56C or 145TC flange attach with either right, remaining or dual result shafts or a hollow bore result. The indirect drive models are shaft input-shaft output boxes for make use of with sprocket or pulley drive systems. They provide an effective low cost solution to speed reduction and increased torque, with higher tolerances for shock loading than helical equipment reducers.
In order to select a gearbox speed reducer, you will have to determine the required torque and provider factor for the application form. Click on “Specs” above for a table that will aid in determining the service element. For service elements above 1.0, multiply the mandatory torque by the support factor.
Our regular 700 Series – the heart of Ever-Power speed reducer product line – has been serving industry reliably for over 40 years. Its verified modular style has set the sector standard for overall performance and may be the most imitated product in the current worm gear velocity reducer marketplace. But why settle for a knock-off when you can have the original – from Ever-Power.
Specifications
11 basic one reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting flexibility allows for installation in practically any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, in addition to greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings can be found in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without external ribs, is made from close-grained cast iron and provides for rigid gear and bearing support. In addition, it offers excellent high temperature dissipation.Double lip, spring-loaded seals guard against oil leakage and stop dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater power.High tensile strength cast bronze worm wheel and hardened and floor alloy steel worm made intregal with the shaft for lengthy and trouble-free life.Oil sight gauge for ease of maintenance (unavailable upon sizes 25 and 34).Factory oil packed.Every device test run just before shipment.Universal mounting with bolt-on foot.Highly modifiable design.All of this at substantially reduced prices than you have already been accustomed to paying for reducers of lesser quality. Less