TF Variety Flanges
Model TF flanges are created from the same high-strength cast iron as the S flanges, but are intended to accommodate the worldwide regular Taper Lock bushing for straightforward set up and elimination
TF Form flanges permit for mounting the bushing around the front (hub) side from the flange
TF flanges are available in sizes 6 through 16 and may be utilised with any style of sleeve as pictured on page SF-5
TR Sort Flanges
TR flanges are comparable towards the TF style, but let for the Taper Lock Bushing to get mounted and eliminated from
the reverse or serration side in the flange
The limited torque ratings on the Taper Lock Bushings permit TR flanges to only be utilized with EPDM or Neoprene sleeves
Distinct bushing sizes are utilised, so they have various maximum bores than the TF flanges
Sizes six by sixteen can be found
Taper-Lock Bushings
The field common taper lock bushing is usually a split style enabling a compression fit from the flange to the shaft with no set screws
The straightforward style and design helps make the set up and elimination uncomplicated while the 8° taper grips tight and gives outstanding concentricity
A Diminished degree of inventory could be achieved on account of the numerous other energy transmission parts that use Taper Lock Bushings such as: sheaves, sprockets, and pulleys
doesn’t offer the Taper-Lock Bushings themselves as they are extensively offered from other manufacturers