DC MOTOR PUMP GROUP one
General Description
Consisting of a heavy duty DC motor as well as the CB1S gear pump, this pump motor group is surely an great hydraulic energy unit for mobile hydraulic equipments, such as car carriers, mobile aerial lifts, and backup methods.
DC MOTOR PUMP GROUP two
Basic Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and verify valve.
DC MOTOR PUMP GROUP 3
General Description
This motor pump consists of a four.5″ DC motor in addition to a CBSR gear pump that has a standard electrical power up/gravity down circuit which has a relief valve, a check valve along with a solenoid release valve.
Unique Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean each of the hydraulic parts concerned before mounting the energy unit.
3. Viscosity from the hydraulic oil shoud be 15~68 cst, which must also be clean and free of charge of impurities. N46 
hydraulic oil is recommended.
4. The electrical power unit really should be mounted horizontally.
5. The relief valve stress is preset about 25% larger than the working pressure.
six. Flow control valve for lowing pace adjustment is available unpon request.
