CSHP Type Shear Pin Couplings
The CSHP Form coupling includes 1 normal flex hub, two piece shear hub and one set of shear pins, one particular typical sleeve and accessory kit.
Intended to protect against harm to linked products
Manufactured to shear at predetermined loads
New Pins might be speedily inserted
Ordering Information and facts
Application: Driver and Driven.
Form and dimension of coupling, horizontal, vertical and so on.
Power: Motor horspower or torque necessity.
Speed: Motor RPM or Driven RPM.
Distance in between shaft ends (BSE).
Shaft sizes.
Specify and that is the Shear Pin hub.
Specify the essential shear torque.

CCS Type Cut-Out Shifter Couplings
The CCS Style coupling includes two flex hubs, one particular special sleeve devoid of lubrication holes and one particular accessory kit which contains a specific seal for the hub that disengages to elliminate undue friction when the disengaged hub is turning inside the sleeve. Standard hub is hand packed with grease.
Permits rapid disengagement of driver and driven shafts devoid of disassembling the coupling
Widely applied on dual drives and products operated in tandem
Specific seal for disengaging hub
Also out there with pins to retain sleeve in each engaged and disengaged positions
Ordering Information
Application: Driver and Driven.
Kind and size of coupling, horizontal, vertical etc.
Energy: Motor horspower or torque necessity.
Velocity: Motor RPM or Driven RPM.
Distance in between shaft ends (BSE).
Shaft sizes.
Dimensions of Shifter Groove (width and outside diameter).
Specify which hub is going to be stationary when coupling is disengaged.